How Do I Calculate the Linear Feet of a Fence?

How Do I Calculate the Linear Feet of a Fence?

Whether it is a privacy fence, a garden fence or pool fence, the very first step in calculating the cost is always the same – determining the total linear feet of the structure. Most contractors, fence materials suppliers and online retailers provide prices per foot. Even one miscalculation may either make you stop in the middle of the project for lack of material or make you pay for the material which you did not use. However, the formula of linear feet calculation for the fence is fairly simple. Read how to find it in this tutorial.

What is “Linear Footage?”

Linear footage is the measure of the length of any object placed in a straight line. As far as the fence goes, linear footage does not take into account the height or width of the construction. It is one foot lengthwise. Thus, for example, 100 feet of fence running along the ground is 100 linear feet, whether it is 4 feet or 8 feet high. The height will play a role during the process of choosing a fence material.

Basic Formula

If there is a single straight run of fence:

Linear feet = The length of the fence run (in feet)

In case, you have a fence that encloses the whole property (e.g., rectangular), the formula is:

Linear feet = Side 1 + Side 2 + Side 3 + Side 4

Or, in case of a rectangle shape, use the perimeter formula:

Linear feet = 2 × (Length + Width)

Step by Step Guide: How to Measure Fence Linear Feet

Mark the fence line. Walk the path of the future fence and place stakes at each of the corners as well as points of deviation. Pull the strings between the stakes.

Measure each segment. Use tape measure or a wheel for the long stretches. Write down the results in feet. If you measured in inches, convert to feet dividing by 12.

Add the segments. Sum up all lengths. That will be your total linear feet.

Subtract the openings. Deduct the width of the gate or other opening, as it will be priced separately. The standard width of the walk gate is from 3 to 4 feet, while the driveway gate is 10 to 16 or even more. Check the specifications of the gate you wish to purchase.

Add the waste allowance. Due to cuts and mistakes, as well as uneven terrain some material will be wasted. For most projects 5% to 10% allowance should suffice.

Example 1: Calculating Linear Feet of Rectangular Yard

Your lot is 60 feet long and 40 feet wide, and you want to fence all four sides.

2 × (60 + 40) = 200 linear feet

You wish to install one 4-feet walk gate, and you should deduct its length:

200 − 4 = 196 linear feet of fence + the gate

With 5% extra, you will plan 206 feet of fencing material.

Example 2: One Side of the Lot

If you only need to close off 100-feet side of your property, the result will be exactly 100 linear feet, as there is nothing to add or subtract.

Example 3: Irregular Shape

However, not every yard is a rectangle. Assume, that your fence is of four sides, and their lengths are 45, 30, 20 and 25 feet.

45 + 30 + 20 + 25 = 120 linear feet

For irregular shapes, just do not guess. Measure every straight segment separately and then sum up.

How to Calculate the Number of Fence Posts?

When the total linear feet of the fence are known, you can calculate the number of posts you will need. Divide the total length by the distance between the posts. It depends on the type of the fence but it is normally from 6 to 8 feet.

Open run (without closing the loop): Posts = (Linear feet ÷ Spacing) + 1

For the 100-foot fence with 8-foot spacing:

100 ÷ 8 = 12.5; rounding up to 13 segments

13 + 1 = 14 posts

Closed loop (fence surrounding all sides of the yard): Posts = Linear feet ÷ Spacing

For the 200-feet yard in the example above with 8-foot spacing:

200 ÷ 8 = 25 posts

Gates, corners and the ends require special posts, thus add some extra pieces.

How to Calculate the Number of Fence Panels?

In case of using the ready-made fence panels, just divide the total linear feet by the panel width.

Example: 196 feet ÷ 8-foot panels = 24.5, that means 25 panels.

Always round up. Since it is impossible to buy half a panel, and the last section can be cut to the size needed, round up always.

Tips on Making Your Calculation Precise:

  • Measure the fence line and not the property line. Fences are usually situated inside the boundary a bit.
  • Check local regulations. In many towns there are regulations regarding setbacks and height restrictions.
  • Take into account slopes. In case you have a sloped land, the fence will follow the shape, and thus its real length is a bit more than the flat measurement. Make an allowance for the slopes.
  • Measure twice. Small mistake in each segment will quickly turn into large one.
  • Use maps for large yards. Online maps or measurement apps will give you a rough estimation of the length beforehand.

Common Mistakes in Measuring Fence:

  • Forgot to subtract the gate. You will pay for the material which will not be installed.
  • Messed up with feet and inches. Convert all measurements to the feet first.
  • Wrongly calculated the number of posts. Open run requires one more post than the number of segments.
  • Did not add the waste allowance. Lack of material in the middle of the project may lead to delays.
  • Confused linear feet and square feet. Square feet is the measurement of area (height × length). Linear feet is the measurement of length.

Is It Necessary to Use a Fence Calculator?

Fence calculator saves time, especially in case of yard with many sides. You enter your dimensions, and it calculates the total linear feet and often provides the numbers of posts and panels as well. Moreover, it is a convenient tool to verify your manual calculations. However, knowledge of the formula will help you to catch any mistake done by the calculator before ordering.

Conclusion

Thus, in order to calculate the linear feet of the fence, measure every straight segment, sum them up, subtract the openings and add a small allowance. Having this number, you will easily calculate the number of posts, panels and your budget. Spend a bit more time measuring and get the right amount of material in one try.

0 Comments

Be the first to comment.

Leave a Comment